22kw Double Twist Bunching Machine For Core Wire , Normal Double
Twist Buncher
Twisting usage:
It is applied to the twisting of above 7 pcs of bare copper
wires,tinned wires,silver jacketed wires and enamelled wires and
double twisting for core wires.
Characteristics:
a). Use PLC, hysteresis clutch take-up device imported from German,
tension sensor ensure the stable tension and high quality stranding
wire, especially for high quality tight line.
b). Use carbon fiber bow, strong rigidity, uneasy-transformation,
small shock, light weight, reduce air friction for high quality of
conductors;
c). Use synchronous belt drive, just to replace the guide wheel to
change the lay distance, easy to operate.
d). Use spindle to calculate meters, only 0.01% error for a certain
wire&cable.
e). Use PLC automatically lubricate spindle bearing, avoid
injecting too much or too little grease. Get rid of unnormal noise
and worn, cost down for maintenance.
Specification:
| Equipment models | 800B | 1000B | 1250C | 1600B |
| Twisting usage | Apply for twisting aerospace, medical equipment, cellphone and
ultra conductor(above seven pcs of bare copper wires, tinned wires,
silver jacketed wires and enameled wires),double twisting for core
wires. |
| Single wire dia(mm) | 0.38-1.70 | 0.3-2.14 | 0.5-2.52 | 0.5-2.52 |
| Stranding section area (mm²) | 1.0-16 | 6.0-25.0 | 10.0-35.0 | 10.0-50.0 |
| Core wire single wire dia(mm) | 1.0-4.0 | 2.0-4.0 | 3.0-6.0 | 3.0-6.0 |
| Core wire stranding outer dia(mm) | 2.0-8.0 | 4.0-10.0 | 6.0-12.0 | 6.0-15.0 |
| Pitch(mm) | 6.3-52.3(24classes) | 35-149(20classes) | 41-155(20classes) | 60-260(20classes) |
| Direction of lay | Optional for right or left |
| Outer dia*bore*outer width | OD800 ID80 H600 | OD1000 ID80 H755 | OD1250 ID80 H950 | OD1600 ID80 H1180 |
| Max rotating speed | 1600rpm(3000twist) | 1000rpm(2000twist) | 2400rpm(4800twist) | 1500rpm(3000twist) |
| Main motor power | 15KW | 18.5KW | 22KW | 30KW |
| Inverter power | 15KW | 18.5KW | 22KW | 30KW |
| Tension control method | Touch screen +PLC+ magnetic powder clutch, ensure the constant
tension from empty to full bobbin |
| Magnetic powder clutch | 10kgf | 20kgf | 30kgf | 40kgf |
| Protection | automatically brake/stop 1)wire inside and outside is broken 2)the preset length is arrived |
| Brake mode | Electromagnetic brake |
| Traversing method | Rolling wire with ring drive units, winding pitch and breadth are
adjustable |
| Operation mode | Touch screen operation |
| Dimension(mm) | 4600L 2000W 2000H | 4000L 2200W 2100H | 4500L 2600w 2500H | 5000L 3000W 3000H |
Machine Photo
