Automatic Double Cable Twist Stranding machine With Bow High Speed
Bunching
Twisting usage:
It is applied to the twisting of above 7 pcs of bare copper
wires,tinned wires,silver jacketed wires and enamelled wires and
double twisting for core wires. mainly apply for stranding the electrical wire and automobile wire
and other small section area Characteristics:
1. High rotation speed, max up to 2600rpm, is the 1.6 times than
normal (1600rpm);
2. Use PLC, hysteresis clutch take-up device imported from German,
tension sensor ensure the stable tension and high quality stranding
wire, especially for high quality tight line.
3. Use carbon fiber bow, strong rigidity, uneasy-transformation,
small shock, light weight, reduce air friction for high quality of
conductors;
4. Use synchronous belt drive, just to replace the guide wheel to
change the lay distance, easy to operate.
5. Use spindle to calculate meters, only 0.01% error for a certain
wire&cable.
6. Use PLC automatically lubricate spindle bearing, avoid injecting
too much or too little grease. Get rid of unnormal noise and worn,
cost down for maintenance.
Main Technical Data
| Equipment models | 500B | 650B | 650C | 800B |
| Twisting usage | It is applied to the twisting of aerospace, medical equipment,
cellphone and ultra conductor(above seven pcs of bare copper wires,
tinned wires, silver jacketed wires and enameled wires),double
twisting for core wires. |
| Singlewire dia(mm) | 0.08-0.45 | 0.15-1.04 | 0.12-0.52 | 0.38-1.70 |
| Stranding section area(mm²) | 0.05-2.5 | 0.35-6.0 | 0.30-4.0 | 1.0-16 |
| Core wire single wire dia(mm) | 0.5-1.5 | 0.5-3.0 | 0.5-2.0 | 1.0-4.0 |
| Core wire stranding outer dia(mm) | 1.0-3.5 | 1.0-6.0 | 1.0-4.0 | 2.0-8.0 |
| Pitch(mm) | 6.3-52.3(24classes) | 11.6-100(34classes) | 11.6-100(34classes) | 23-147(20classes) |
| Direction of lay | Optional for right or left |
| Outer dia*bore*outer width | OD500 ID56 H375 | OD630 ID56 H475 | OD630 ID56 H475 OD630 ID127 H475 | OD800 ID80 H600
|
| Max rotating speed | 3000rpm(6000twist) | 2000rpm(4000twist) | 2400rpm(4800twist) | 1500rpm(3000twist) |
| Main motor power | 5.5KW | 7.5KW | 11KW | 15KW |
| Inverter power | 5.5KW | 7.5KW | 11KW | 15KW |
| Tension control method | Touch screen +PLC+ magnetic powder clutch, it may ensure the
constant tension from empty bobbin to full bobbin |
| Magnetic powder clutch | 1.2kgf | 5kgf | 2.5kgf | 10kgf |
| Protection | Machine will automatically brake when wire inside and outside is
broken, the machine will automatically stop when the preset length
is arrived. |
Machine Photo
