Low Relaxation Stabilization Prestressed Steel Strand Equipment
Technical Proposal
1. Main technology specification
| Product specifications(mm) | Φ17.8,Φ15.7,Φ15.24,Φ12.7,Φ11.1,Φ9.53 |
| Strength level | 1860MPa |
| Designed speed | 120m/min |
| Assessment speed | 110m/min |
2. The annual output table
| Strand ø | Area | Tensile Strength | Weight | pitch | Speed | pull | Production |
| mm | mm2 | MPa | kg/m | mm | m/min | KN | kg/h | T/month | t/year |
| 9.53 | 55 | 1860 | 0.43 | 133 | 79.8 | 48 | 2399 | 978 | 11735 |
| 11.1 | 74.2 | 0.582 | 155.4 | 93 | 62 | 3527 | 1542 | 18511 |
| 12.7 | 98.7 | 0.775 | 178 | 106 | 83 | 4929 | 2340 | 28095 |
| 15.24 | 140 | 1.115 | 213 | 120 | 118 | 8028 | 3813 | 45759 |
| 17.8 | 191 | 1.5 | 250 | 70 | 160 | 6300 | 2992 | 35910 |
| 24 h/day * 80% * 25day/month | |
3. Main parts
3.1 Skip Strander 6 + 1 model JXN1250
Speed of twister
Rotation speed 600 RPM
Max speed (1×7strand) 120 m/min
Pitch ( 1x7 strand) 14 K
3.1. Spool frame
Number of H-wheels 6
Flange diameter 1250mm
Barrel diameter 500mm
Working width 840mm
Overall width 964mm
Bore diameter 120mm
Maximum load 3.500Kg
A Independent pay-off
B Rack
C . Drive
D. Cradles
E. Bow
F. Housing
G. Wire die forming
H. After the integer unit
3.2 First group of pulling capstan
Diameter 2000mm
Max. continuous pull 16000 kg
Max. production speed 120 m/min
Max. elongation 5%
Motor power 280 kw
Constant working speed 960 rpm
Constant power 900 – 1500 rpm
motor thermal protection, ABB vector control frequency converter.
A. Tension wheel
B. Gear box.
C. Control system
D. Brake system
E. The winding line pressing strand clamp
3.3 Pressure sensor
On-line tension measuring system wheel diameter is 800 mm, the
system is located in the back of first tension wheel and in the
front of induction furnace, using this system can ensure the two
tension wheel units to realize stabilized constant tension control
and can monitor and display real time data.
3.4 Intermediate frequency furnace
Induction furnace :power 600KW, maximum capacity: 9000 Kg/hour,
including the cooling for the strand.
Rated power 600 KW
Rated frequency 6000 HZ
Rectified input voltage 380V(50Hz)
DC rated voltage 500 V
DC rated current 1200A
Output power range 10%--100%
Temperature 370-420°C
3.5 Cooling water baths
Cooling water tank is about 9 meters long, use water spray, blow
dry device with 4 sets, hot air blower,with an automatic cooling
water temperature control system.
Cooling water flow 25m3/hour
Cooling water temperature under 32° C
water pressure 3 bars
compressed air pressure ≧5 bars
dry air flow 250 Nm3/h
3.6 The second tension wheel unit
The second tension wheel unit is coordinated with the first tension
wheel to generate winding tension.
Diameter 2000 mm
Max. constant tension 16000 Kg
Max. production speed 120 m/min
Max. Elongation 5%
Power 280 kw
Rotated speed 960 rpm
Range of rotated speed 900-1500 rpm
Hot protection switch
ABB vector control frequency converterABB
3.7 JXN90-5 synchronizer
On the synchronising unit are two rollers, one is on the
synchronising stand, the other is on the dance arm. Pneumatic
system provides converse and forward pressure, which can be
adjusted manually. Different synchronising tensions can be achieved
by different strand diameters. One set location sensor feedback the
location of the dance arm to the inverter of the take-up spool, as
to control the speed, to make sure the dance arm work at the
centre.
3.8 CPJXN125A-11A Take-up/Pay-off unit
Dimensions of the two fixed bobbins
External diameter 2800 mm
Internal diameter 1200 mm
Width 1500 mm
3.8.2 Max loading weight: 2
3.9 JXN90-5 Synchronising unit
Two rollers, one is on the synchronising stand, the other is on the
dance arm. Pneumatic system provides converse and forward pressure,
which can be adjusted manually. Different synchronising tensions
can be achieved by different strand diameters. One set location
sensor feedback the location of the dance arm to the inverter of
the take-up spool, as to control the speed, to make sure the dance
arm work at the centre.
3.10 Precision winding machine : JXN90-6
Strand diameter rang 9.53— 17.8mm
Precision winding Strand diameter range 9.53—17.8mm
Inner diameter 800mm
Flange external diameter 1650mm
width 750mm
Max. Load 4.500Kg
Groove numbers 8
Max. spooling force 600Kg
Traverse pitch 9 —18mm
Strand guiding templates We supply 5 sets of guiding templates
according to the following specifitions:
Φ15.7,Φ15.24,Φ12.7,Φ11.1,Φ9.53.
Max. Speed 300m/min
Winding motor
Winding motor AC MAIN motor is cooled by a single Fan, working at
constant torque/constant Power with power 45 kW
Controlled by: ABB Vector-control converter.
Traversing motor
Traverse motor working in constant power 1.5 kW
Thermal protections controlled by ABB Vector-control converter
Drive and control for PC strand line
4.1 The control system contains control cabinet. The protection
level is IP23.
4.2 The cabinet is a DOUBLE SIDE CABINET, painted colour RAL 7032 ,
gray
4.3 Quantity and dimension will be given by the supplier ..
4.4 ABB Frequency converter
4.5 The cooling system consists of fans and filter-nets. The
cabinets should be placed in an air conditioned room where max.
temperature lower than 30° C – Humidity lower than 40%
Inlet of the main power and the control system enter from the
bottom of the control cabinet.
4.6 GB Standards4.7 The Cubicle consists of:
Main circuit breaker with fuses
ABB converter
auxiliary loop
4.8 Power Supplies
Power Supply: three phase 380V 50HZ
Power Supply: single phase 220V 50HZ
