Steel Wire Rope Online PP Extrusion Injection Line For Eevator and Marine in Planetary Stranding Machine

Inline Extrusion (Injection) composition:

1. one Extruder
2. two Vacuum hopper loaders
3. one Volumetric dosing unit
4. one Flow filter
5. one T-shape – Melt Volume distributor
6. two Melt dosing pumps
7. one Extrusion crosshead for Injection
8. one Extrusion crosshead for outer layer
9. Electrical controls
10. Installation and commissioning

    
    
    TECHNICAL SPECIFICATION
    The purpose of the Inline Extrusion is the filling of gaps inside of steel ropes avoiding dirt to enter the rope causing damage and wear.
    One extrusion head is placed before the stranding die holder. A second extrusion head is placed behind the stranding die holder. The first extrusion head is injecting the melt in between the strands during closing.
    The entire unit is positioned on rails and can be moved inside the stranding line when required or outside the stranding line when not used.
    
    Rope diameter range over Isolation: 10 - 60mm for extrusion
    Insulation Material: typically, PP
    Measurements: approx. 4600 x 2200 x 2400mm (LxWxH)
    Weight of the entire unit: approx. 2800kg
    Weight of the control cabinet: approx. 700kg
    Line center height: 1000mm (or to be agreed)
    
    DESCRIPTION OF THE INDIVIDUAL MACHINE UNITS
    ad 1. one Extruder
    
    The Extruder has the following technical figures:
    
    Material: PP - Granulat (Polypropylen)
    Output: approx. 50kg/h, with PP
    Motor: approx. 22kW AC
    Screw drive: by gearbox
    Screw diameter: 50mm
    Screw length (L/D): 30
    Number of heating zones: 3
    Heating capacity: approx. 8,25kW (total)
    Cooling capacity: approx. 3x 0,5kW
    Pressure transductor: included
    Moving of the entire extrusion unit: by manual handwheel
    Moving length: 800mm
    
    ad 2. two Vacuum hopper loaders
    
    The Granulate is automatically fed into the extruder main hopper and one auxiliary hopper using via two hoppers loaders.
    One hopper loader is mounted on top of each hopper.
    Capacity: min. 100kg/h
    
    ad 3. one Volumetric dosing unit
    
    No. of main hoppers: one
    No. of auxiliary hoppers: one
    Digital controllers: included
    Acoustic alarm: included
    Capacity of Sub dosing station: 0,07 – 72kg/h
    Dosing motor: Stepper motor
    Dosing screw: included
    Dosing motor speed: 0,1 – 200rpm
    
    The granulate dosing unit has to hoppers. One Main hopper and a second auxiliary hopper. The granulate of both hoppers are mixed in the Granulate dosing unit according to an adjustable ratio.
    
    ad 4. one Flow filter
    
    Design: hydraulic type
    Inlet diam.: 45 mm
    Filter net diameter: 55 mm
    Number of heating zones: 1
    Heating capacity: approx. 4x0,7kW = 2,8kW
    Filtration capacity: 50kg/h with PP
    Hydraulic control unit: included
    The flow filter is hydraulically driven and has two filter positions. The operator can select which filter is in operation and which one can be cleaned. The selection is made using manual control levers.
    
    ad 5. one T-shape – Melt Volume distributor
    
    Inlet-ø: 45mm
    Outlet-ø: 2x 45mm
    Number of heating zones: 1
    Heating capacity: approx. 3,6kW (total)
    
    ad 6. two Melt dosing pumps
    
    Number of heating zones: 1
    Heating capacity: approx. 2,4kW (total)
    Speed: max. 65rpm
    Speed adjustment: steplessly adjustable
    Motor: 2,2kW AC
    Capacity: 18 + 18 CC/revolution
    Pressure: 0 – 250bar
    
    ad 7. one Extrusion crosshead for Injection
    
    Type: Conical entry & injection type
    Application: mono extrusion
    Max finished product diam.: 60mm
    Number of heating zones: 2
    Heating capacity: approx. 2 x 2kW
    Diameter product hole: according to your request
    Extrusion tooling: included for one size
    
    The first extrusion head is injecting the melt into the space in between wires or strands of a steel rope. The steel rope is continuously running through the head.
    
    ad 8. one Extrusion crosshead for outer layer
    
    Type: Cylindric entry type
    Application: mono extrusion
    Max finished product diam.: 60mm
    Number of heating zones: 2
    Heating capacity: approx. 2 x 2kW
    Diameter product hole: according to your size requirement
    Extrusion tooling: included for one size
    
    The first extrusion head is sheathing the steel rope and filling up the outer gaps by putting a round layer of Material on the outside of the steel rope.
    
    ad 9. Electrical controls
    
    The electrical controls for the entire unit is completely mounted in one control cabinet. The control cabinet is located near the Extruder. The controls are ready for connection to your local power supply.
    Digital AC-drives: SIEMENS SINAMICS
    Drives programmed with: SIEMENS Starter
    PLC: SIEMENS S7-300
    PLC programmed with: SIEMENS Step 7
    HMI (human machine interface): SIEMENS KP COMFORT
    HMI programmed with: SIEMENS TIA Portal
    Remote I/O SIEMENS ET200S (if necessary)
    Communication: PROFINET
    Main switch: EATON (formerly Möller)
    General control material: SIEMENS
    Power supplies: SIEMENS
    Control Cabinets / Panel RITTAL
    Cabinet cooling: Filter blower
    Motors: SIEMENS, or similar brands
    Power supply: To be agreed
    Control voltage: To be agreed

Anhui Herrman Machinery Co Ltd was found in 2010. It is 100% Private Owned by Anhui Herrman Group which was established in 1994. Our Target Goal is to serve customer with EPC business on Cable Production Projects. We have perfect Team on Engineering Design, OEM Production and High Quality Contractor. We have very good experience on supplying all kinds of cable making machineries which are related

to Power cable, control cable, insulated wires & Optical Fiber cable with Turn Key projects as well.

We have good reputations in 36 countries such as USA, Turkey, Czech Republic, Korea & India, Egypt, etc. . We supply not only High Quality machinery, but also good maintenance service to supply spare parts and engineering service. To achieve good satisfaction, you are mostly welcome to visit our factory and interview good machines which are running in China & other countries.